How to Remove Condensation From Watch: 5 Easy Ways

How to remove condensation from watch face is a possible problem of most watch collectors. You go out for a walk and after a while; you notice condensation building up on your watch face. What causes this condensation in your watch?

Manufacturers advertise most watches as water-resistant, which is a nice feature as it provides yet another level of protection to your watch. However, when used wrongly, even the ideal water-resistant watch may let in moisture and suffer condensation because no watch is 100% waterproofed. If your watch has suffered condensation, then this post is right for you. Before we look at how to remove condensation from watch, we’ll have a quick look at what causes condensation in a watch.

 

What Water-resistant Means for Your Watch

Different water-resistant values are engraved at the back of our watches that determine their resistant levels. However, a watch with a water resistance level of 100 meters doesn’t mean you can dive 100 meters deep with it.

No watch is 100 percent watertight. Water-resistant watches lose their resistant over the years since they rely upon an O-ring which is a gasket that acts as a seal around the crown of the watch. Considering that the O-ring is often made from silicone or rubber, it turns to wear out with time, thus reducing the resistant of the watch to water. This wearing out may take months or years, but it happens.

 

How to recognize condensation in a waterproof watch

Before answering the question on how to remove condensation from watch, you need to recognize how the condensation looks like. Condensation in a waterproof watch looks like a couple of tiny droplets of water that appear on the inside of your watch. In case you’ve got a foggy watch face, then it’s probably because of condensation.

 

remove condensation from watch

 

 

What causes condensation in a watch?

Condensation in a watch occurs due to several reasons. Understanding these reasons can help prevent subsequent occurrence.

 

1) Sharp temperature change

Suspended air particles from cold weather or during winter may get inside a watch and once you get inside a warm area, these particles liquefy forming droplets on the inside.

 

2) A compromised gasket

If the water-resistant seal in some watches is compromised, you may see condensations form from time to time. Gaps around watch winders can also cause condensation to form. Consider visiting a reputable watchmaker to repair the compromised gasket.

 

3) Prolonged immersion in water

If you submerge your water-resistant watch underwater for a long period, condensation can form. This is because the pressure in the water over time can force some water to pass the waterproof gasket.

 

4) A crack on the watch dial

If there’s a slight crack in the watch’s glass, suspended air particles from cold weather can easily enter the watch. Once this happens, condensation easily takes place once these air particles liquefy.

 

5) Quality of the watch

Poorly made watches with very weak waterproof gasket are prone to condensation. If the quality of the watch isn’t what you thought it would be and there’s a possibility to return it, please do so. Most of the problems fall into this category.

 

6) Absence of water-resistant feature

Some watches are not water-resistant at all, making the condensation easy to form. Once some non-water-resistant watches are mistakenly dropped in water and not treated quickly enough, the likelihood of condensation forming is high.

 

How to remove condensation from watch

So then, how to remove condensation from watch? There are a few Do It Yourself (DIY) methods to remove condensation from watch without causing damage to the watch. Try out these methods and in no time your watch will look as good as new.

 

1) A bed of instant rice.

Instant rice is reportedly more effective at absorbing droplets of water. Professionals have used rice in the past to protect camera equipment from a humid environment.

Remove the crown of your watch and submerge it in a small container of around a quarter cup of instant rice. Leave it for a night or two before checking the watch face to see if it has absorbed the moisture.

 

2) Silica gel sachets or cat litter

Silica gel sachets are perfect for removing condensation from a watch. Remove the crown of the watch and submerge it in a container of silica gel sachets. Leave it there for a day or two. If you can lay your hands on cat litter instead, follow the same procedure to get the fog off your watch.

 

3) How to Remove Condensation from Watch using Direct sunlight

On sunny days, you might use direct sunlight to evaporate the condensation and defog your watch. Remove the back of the watch (if it is easily removable) and lie the watch face and crystal directed downwards in a position where the sunlight can warm it. Allow the watch in sunlight for some time and check it regularly to prevent overheating.

 

4) Alternative heat sources

If it is possible to remove the back of your watch, use a blow dryer on low heat to dry the inside of the watch. This method is very intuitive. If possible, do this outside in super cold weather so you end up with the lowest dew point inside your watch when you are done. Allow the watch to cool before you put it back together.

 

5) Visit a reputable watchmaker.

If you damage the watch, a trip to a reputable watchmaker (not a jeweler) is necessary. No matter the level of water damage of the watch, we highly recommend bringing the timepiece to a watchmaker for repair as soon as possible.

 

How to prevent condensation in your watches.

You can use preventive measures to avoid subsequent condensation problems. We list a few below:

1.) Pay attention to the water-resistant that a manufacturer recommends for a particular timepiece. Always make sure you use the watch below the resistant levels indicated by the manufacturer to compensate for the wearing water-resistant seal.

 

Last update on 2020-08-04 / Affiliate links / Images from Amazon Product Advertising API

 

Different ways of expressing water resistance include BAR, ATM, and meter. But what do they mean?

  • 3 ATM/BAR or 30 meters: This watch is resistant against rain and water splashes.
  • 5 ATM/BAR or 50 meters: You can wear this waterproof watch during swimming. They are not suitable for snorkel or diving.
  • 10 ATM/BAR or 100 meters: This waterproof watch is good for most water sports like swimming, sailing, and snorkeling. However, they are not suitable for deep diving
  • 20 ATM/BAR or 200 meters: You can use this waterproof watch for many water sports, including deep diving.

2.) If you notice a crack in the screen, do well to replace it as it already presents a risk.

3.) Don’t submerge the watch in water for longer periods if it not necessary.

 

Wrapping Up

Whether a cheap casual watch or a luxury timepiece,  a foggy watch is not a lovely sight to behold. You should deal the condensation in a watch early on before it damages the dial of the watch.

There are various intuitive ways to get rid of condensation in your watch; however, we’ve just given a hand-full of them. If you are looking for specific watches for nurses or pilots, we’ve got you covered too.

Have you experienced condensations in your watch lately? Tell us how you solved the problem.

error:
0 Shares
Copy link